怎么自己创建网站免费网站建设补充协议模板

本文主要是列出一些蓝牙配对重要的类和方法/函数，遇到相关问题时方便查找添加log排查。

蓝牙扫描列表页面：packages/apps/Settings/src/com/android/settings/bluetooth/DeviceListPreferenceFragment.java点击其中一个设备会调用：onPreferenceTreeClick()

    @Overridepublic boolean onPreferenceTreeClick(Preference preference) {if (KEY_BT_SCAN.equals(preference.getKey())) {startScanning();return true;}if (preference instanceof BluetoothDevicePreference) {BluetoothDevicePreference btPreference = (BluetoothDevicePreference) preference;CachedBluetoothDevice device = btPreference.getCachedDevice();mSelectedDevice = device.getDevice();mSelectedList.add(mSelectedDevice);//配对onDevicePreferenceClick(btPreference);return true;}return super.onPreferenceTreeClick(preference);}

接着调用 packages/apps/Settings/src/com/android/settings/bluetooth/BluetoothDevicePreference.java

void onClicked() {Context context = getContext();int bondState = mCachedDevice.getBondState();final MetricsFeatureProvider metricsFeatureProvider =FeatureFactory.getFactory(context).getMetricsFeatureProvider();if (mCachedDevice.isConnected()) {metricsFeatureProvider.action(context,SettingsEnums.ACTION_SETTINGS_BLUETOOTH_DISCONNECT);askDisconnect();} else if (bondState == BluetoothDevice.BOND_BONDED) {metricsFeatureProvider.action(context,SettingsEnums.ACTION_SETTINGS_BLUETOOTH_CONNECT);mCachedDevice.connect();} else if (bondState == BluetoothDevice.BOND_NONE) {metricsFeatureProvider.action(context,SettingsEnums.ACTION_SETTINGS_BLUETOOTH_PAIR);if (!mCachedDevice.hasHumanReadableName()) {metricsFeatureProvider.action(context,SettingsEnums.ACTION_SETTINGS_BLUETOOTH_PAIR_DEVICES_WITHOUT_NAMES);}pair();//配对}}

继续调用

public boolean startPairing() {// Pairing is unreliable while scanning, so cancel discoveryif (mLocalAdapter.isDiscovering()) {mLocalAdapter.cancelDiscovery();}//创建配对if (!mDevice.createBond()) {return false;}return true;}

一直往下会到BluetoothDevice.java，在里面调用了IBuletooth.aidl

frameworks/base/core/java/android/bluetooth/BluetoothDevice.java

@RequiresPermission(android.Manifest.permission.BLUETOOTH_CONNECT)private boolean createBondInternal(int transport, @Nullable OobData remoteP192Data,@Nullable OobData remoteP256Data) {final IBluetooth service = sService;if (service == null) {Log.w(TAG, "BT not enabled, createBondOutOfBand failed");return false;}try {return service.createBond(this, transport, remoteP192Data, remoteP256Data, mAttributionSource);} catch (RemoteException e) {Log.e(TAG, "", e);}return false;}

在AdapterService.java里实现了IBluetooth.Stub

packages/apps/Bluetooth/src/com/android/bluetooth/btservice/AdapterService.java

@VisibleForTestingpublic static class AdapterServiceBinder extends IBluetooth.Stub {private AdapterService mService;AdapterServiceBinder(AdapterService svc) {mService = svc;mService.invalidateBluetoothGetStateCache();BluetoothAdapter.getDefaultAdapter().disableBluetoothGetStateCache();}.....省略@Overridepublic boolean createBond(BluetoothDevice device, int transport, OobData remoteP192Data,OobData remoteP256Data, AttributionSource attributionSource) {Attributable.setAttributionSource(device, attributionSource);AdapterService service = getService();if (service == null || !callerIsSystemOrActiveOrManagedUser(service, TAG, "createBond")|| !Utils.checkConnectPermissionForDataDelivery(service, attributionSource, "AdapterService createBond")) {return false;}// This conditional is required to satisfy permission dependencies// since createBond calls createBondOutOfBand with null value passed as data.// BluetoothDevice#createBond requires BLUETOOTH_ADMIN only.service.enforceBluetoothPrivilegedPermissionIfNeeded(remoteP192Data, remoteP256Data);//进入createBondreturn service.createBond(device, transport, remoteP192Data, remoteP256Data,attributionSource.getPackageName());}}

boolean createBond(BluetoothDevice device, int transport, OobData remoteP192Data,OobData remoteP256Data, String callingPackage) {DeviceProperties deviceProp = mRemoteDevices.getDeviceProperties(device);if (deviceProp != null && deviceProp.getBondState() != BluetoothDevice.BOND_NONE) {return false;}if (!isPackageNameAccurate(this, callingPackage, Binder.getCallingUid())) {return false;}CallerInfo createBondCaller = new CallerInfo();createBondCaller.callerPackageName = callingPackage;createBondCaller.user = UserHandle.of(UserHandle.getCallingUserId());mBondAttemptCallerInfo.put(device.getAddress(), createBondCaller);mRemoteDevices.setBondingInitiatedLocally(Utils.getByteAddress(device));// Pairing is unreliable while scanning, so cancel discovery// Note, remove this when native stack improvescancelDiscoveryNative();Message msg = mBondStateMachine.obtainMessage(BondStateMachine.CREATE_BOND);msg.obj = device;msg.arg1 = transport;Bundle remoteOobDatasBundle = new Bundle();boolean setData = false;if (remoteP192Data != null) {remoteOobDatasBundle.putParcelable(BondStateMachine.OOBDATAP192, remoteP192Data);setData = true;}if (remoteP256Data != null) {remoteOobDatasBundle.putParcelable(BondStateMachine.OOBDATAP256, remoteP256Data);setData = true;}if (setData) {msg.setData(remoteOobDatasBundle);}//发送配对messagemBondStateMachine.sendMessage(msg);return true;}

接着进入packages/apps/Bluetooth/src/com/android/bluetooth/btservice/BondStateMachine.java

private boolean createBond(BluetoothDevice dev, int transport, OobData remoteP192Data,OobData remoteP256Data, boolean transition) {if (dev.getBondState() == BluetoothDevice.BOND_NONE) {infoLog("Bond address is:" + dev);byte[] addr = Utils.getBytesFromAddress(dev.getAddress());boolean result;// If we have some dataif (remoteP192Data != null || remoteP256Data != null) {result = mAdapterService.createBondOutOfBandNative(addr, transport,remoteP192Data, remoteP256Data);} else {//调用了native的代码result = mAdapterService.createBondNative(addr, transport);}BluetoothStatsLog.write(BluetoothStatsLog.BLUETOOTH_BOND_STATE_CHANGED,mAdapterService.obfuscateAddress(dev), transport, dev.getType(),BluetoothDevice.BOND_BONDING,remoteP192Data == null && remoteP256Data == null? BluetoothProtoEnums.BOND_SUB_STATE_UNKNOWN: BluetoothProtoEnums.BOND_SUB_STATE_LOCAL_OOB_DATA_PROVIDED,BluetoothProtoEnums.UNBOND_REASON_UNKNOWN);if (!result) {BluetoothStatsLog.write(BluetoothStatsLog.BLUETOOTH_BOND_STATE_CHANGED,mAdapterService.obfuscateAddress(dev), transport, dev.getType(),BluetoothDevice.BOND_NONE, BluetoothProtoEnums.BOND_SUB_STATE_UNKNOWN,BluetoothDevice.UNBOND_REASON_REPEATED_ATTEMPTS);// Using UNBOND_REASON_REMOVED for legacy reasonsendIntent(dev, BluetoothDevice.BOND_NONE, BluetoothDevice.UNBOND_REASON_REMOVED);return false;} else if (transition) {transitionTo(mPendingCommandState);}return true;}return false;}

这里调到了JNI层的代码，进入packages/apps/Bluetooth/jni/com_android_bluetooth_btservice_AdapterService.cpp

static jboolean createBondNative(JNIEnv* env, jobject obj, jbyteArray address,jint transport) {ALOGV("%s", __func__);if (!sBluetoothInterface) return JNI_FALSE;jbyte* addr = env->GetByteArrayElements(address, NULL);if (addr == NULL) {jniThrowIOException(env, EINVAL);return JNI_FALSE;}//调用hal层的配对函数int ret = sBluetoothInterface->create_bond((RawAddress*)addr, transport);env->ReleaseByteArrayElements(address, addr, 0);return (ret == BT_STATUS_SUCCESS) ? JNI_TRUE : JNI_FALSE;
}

调用到了hal层的代码，在蓝牙协议栈里 system/bt/btif/src/bluetooth.cc

static int create_bond(const RawAddress* bd_addr, int transport) {if (!interface_ready()) return BT_STATUS_NOT_READY;if (btif_dm_pairing_is_busy()) return BT_STATUS_BUSY;//调用了btif_dm_create_bonddo_in_main_thread(FROM_HERE,base::BindOnce(btif_dm_create_bond, *bd_addr, transport));return BT_STATUS_SUCCESS;
}

调用到了system/bt/btif/src/btif_dm.cc

/********************************************************************************* Function         btif_dm_create_bond** Description      Initiate bonding with the specified device*******************************************************************************/
void btif_dm_create_bond(const RawAddress bd_addr, int transport) {BTIF_TRACE_EVENT("%s: bd_addr=%s, transport=%d", __func__,bd_addr.ToString().c_str(), transport);btif_stats_add_bond_event(bd_addr, BTIF_DM_FUNC_CREATE_BOND,pairing_cb.state);pairing_cb.timeout_retries = NUM_TIMEOUT_RETRIES;btif_dm_cb_create_bond(bd_addr, transport);
}

static void btif_dm_cb_create_bond(const RawAddress bd_addr,tBT_TRANSPORT transport) {bool is_hid = check_cod(&bd_addr, COD_HID_POINTING);bond_state_changed(BT_STATUS_SUCCESS, bd_addr, BT_BOND_STATE_BONDING);int device_type = 0;tBLE_ADDR_TYPE addr_type = BLE_ADDR_PUBLIC;std::string addrstr = bd_addr.ToString();const char* bdstr = addrstr.c_str();if (transport == BT_TRANSPORT_LE) {if (!btif_config_get_int(bdstr, "DevType", &device_type)) {btif_config_set_int(bdstr, "DevType", BT_DEVICE_TYPE_BLE);}if (btif_storage_get_remote_addr_type(&bd_addr, &addr_type) !=BT_STATUS_SUCCESS) {// Try to read address type. OOB pairing might have set it earlier, but// didn't store it, it defaults to BLE_ADDR_PUBLICuint8_t tmp_dev_type;tBLE_ADDR_TYPE tmp_addr_type = BLE_ADDR_PUBLIC;BTM_ReadDevInfo(bd_addr, &tmp_dev_type, &tmp_addr_type);addr_type = tmp_addr_type;btif_storage_set_remote_addr_type(&bd_addr, addr_type);}}if ((btif_config_get_int(bdstr, "DevType", &device_type) &&(btif_storage_get_remote_addr_type(&bd_addr, &addr_type) ==BT_STATUS_SUCCESS) &&(device_type & BT_DEVICE_TYPE_BLE) == BT_DEVICE_TYPE_BLE) ||(transport == BT_TRANSPORT_LE)) {BTA_DmAddBleDevice(bd_addr, addr_type, device_type);}if (is_hid && (device_type & BT_DEVICE_TYPE_BLE) == 0) {bt_status_t status;status = (bt_status_t)btif_hh_connect(&bd_addr);if (status != BT_STATUS_SUCCESS)bond_state_changed(status, bd_addr, BT_BOND_STATE_NONE);} else {//执行到这个方法BTA_DmBond(bd_addr, addr_type, transport, device_type);}/*  Track  originator of bond creation  */pairing_cb.is_local_initiated = true;
}

这个函数BTA_DmBond里调用到了system/bt/bta/dm/bta_dm_act.cc

/** Bonds with peer device */
void bta_dm_bond(const RawAddress& bd_addr, tBLE_ADDR_TYPE addr_type,tBT_TRANSPORT transport, int device_type) {tBTA_DM_SEC sec_event;char* p_name;//在BTM_SecBond函数发送配对信息，蓝牙地址、数据、命令等信息tBTM_STATUS status =(bluetooth::shim::is_gd_security_enabled())? bluetooth::shim::BTM_SecBond(bd_addr, addr_type, transport,device_type): BTM_SecBond(bd_addr, addr_type, transport, device_type, 0, NULL);if (bta_dm_cb.p_sec_cback && (status != BTM_CMD_STARTED)) {memset(&sec_event, 0, sizeof(tBTA_DM_SEC));sec_event.auth_cmpl.bd_addr = bd_addr;p_name = (bluetooth::shim::is_gd_security_enabled())? bluetooth::shim::BTM_SecReadDevName(bd_addr): BTM_SecReadDevName(bd_addr);if (p_name != NULL) {memcpy(sec_event.auth_cmpl.bd_name, p_name, BD_NAME_LEN);sec_event.auth_cmpl.bd_name[BD_NAME_LEN] = 0;}/*      taken care of by memset [above]sec_event.auth_cmpl.key_present = false;sec_event.auth_cmpl.success = false;*/sec_event.auth_cmpl.fail_reason = HCI_ERR_ILLEGAL_COMMAND;if (status == BTM_SUCCESS) {sec_event.auth_cmpl.success = true;} else {/* delete this device entry from Sec Dev DB */bta_dm_remove_sec_dev_entry(bd_addr);}bta_dm_cb.p_sec_cback(BTA_DM_AUTH_CMPL_EVT, &sec_event);}
}

来到system/bt/stack/btm/btm_sec.cc，最终在这里发送命令给HCI与硬件打交道

/********************************************************************************* Function         BTM_SecBond** Description      This function is called to perform bonding with peer device.*                  If the connection is already up, but not secure, pairing*                  is attempted.  If already paired BTM_SUCCESS is returned.** Parameters:      bd_addr      - Address of the device to bond*                  transport    - doing SSP over BR/EDR or SMP over LE*                  pin_len      - length in bytes of the PIN Code*                  p_pin        - pointer to array with the PIN Code**  Note: After 2.1 parameters are not used and preserved here not to change API******************************************************************************/
tBTM_STATUS BTM_SecBond(const RawAddress& bd_addr, tBLE_ADDR_TYPE addr_type,tBT_TRANSPORT transport, int device_type,uint8_t pin_len, uint8_t* p_pin) {if (bluetooth::shim::is_gd_shim_enabled()) {return bluetooth::shim::BTM_SecBond(bd_addr, addr_type, transport,device_type);}if (transport == BT_TRANSPORT_INVALID)transport = BTM_UseLeLink(bd_addr) ? BT_TRANSPORT_LE : BT_TRANSPORT_BR_EDR;tBT_DEVICE_TYPE dev_type;BTM_ReadDevInfo(bd_addr, &dev_type, &addr_type);/* LE device, do SMP pairing */if ((transport == BT_TRANSPORT_LE && (dev_type & BT_DEVICE_TYPE_BLE) == 0) ||(transport == BT_TRANSPORT_BR_EDR &&(dev_type & BT_DEVICE_TYPE_BREDR) == 0)) {return BTM_ILLEGAL_ACTION;}//执行btm_sec_bond_by_transport函数return btm_sec_bond_by_transport(bd_addr, transport, pin_len, p_pin);
}/********************************************************************************* Function         btm_sec_bond_by_transport** Description      this is the bond function that will start either SSP or SMP.** Parameters:      bd_addr      - Address of the device to bond*                  pin_len      - length in bytes of the PIN Code*                  p_pin        - pointer to array with the PIN Code**  Note: After 2.1 parameters are not used and preserved here not to change API******************************************************************************/
tBTM_STATUS btm_sec_bond_by_transport(const RawAddress& bd_addr,tBT_TRANSPORT transport, uint8_t pin_len,uint8_t* p_pin) {//....代码太多，最底层就是发送控制命令if (!controller_get_interface()->supports_simple_pairing()) {/* The special case when we authenticate keyboard.  Set pin type to fixed *//* It would be probably better to do it from the application, but it is *//* complicated */if (((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) ==BTM_COD_MAJOR_PERIPHERAL) &&(p_dev_rec->dev_class[2] & BTM_COD_MINOR_KEYBOARD) &&(btm_cb.cfg.pin_type != HCI_PIN_TYPE_FIXED)) {btm_cb.pin_type_changed = true;//通过HCI向底层发送命令btsnd_hcic_write_pin_type(HCI_PIN_TYPE_FIXED);}}return status;
}

到这里就结束了，后面就是控制硬件发起配对操作。