当前位置： 首页 > news >正文

汉中专业网站建设开发大牌装修公司

news 2025/9/17 15:14:42
汉中专业网站建设开发,大牌装修公司,网站开发与建设,wordpress app端一.跨主机通讯原理 在主机192.168.31.140上的docker0(172.17.0.0/16)中有一个容器mycentos( 172.17.0.2/16), 在主机192.168.31.81上的docker0(172.17.0.0/16)中有一个容器mycentos( 172.17.0.2/16),然后在主机192.168.31.140上ping主机192.168.31.81,发现ping不通要实现两个主…

一.跨主机通讯原理

在主机192.168.31.140上的docker0(172.17.0.0/16)中有一个容器mycentos( 172.17.0.2/16),

在主机192.168.31.81上的docker0(172.17.0.0/16)中有一个容器mycentos( 172.17.0.2/16),然后在主机192.168.31.140上ping主机192.168.31.81,发现ping不通要实现两个主机间容器的通信,怎么实现呢?

各项配置如下（举例说明）：
  • 主机1的IP地址为：192.168.31.140
  • 主机2的IP地址为：192.168.31.81
  • 为主机1上的Docker容器分配的子网：192.168.1.0/24
  • 为主机2上的Docker容器分配的子网：192.168.2.0/24
  • 这样配置之后，两个主机上的Docker容器就肯定不会使用相同的IP地址从而避免了IP冲突
接下来定义两条路由规则即可:
        从container1 发往 container2 的数据包，首先发往 container1 的 “网关 ”docker0 ，然后通过查找主机 1的路由得知需要将数据包发给主机2 ，数据包到达主机 2 后再转发给主机 2 的 docker0 ，最后由其将数据包转到container2 中,反向原理相同

二.两台主机机通讯实验

1.分别在主机1和主机2上面创建两个网络

主机1创建网络

docker network create --driver bridge --subnet 192.168.1.0/24 --gateway
192.168.1.1 docker1

docker network ls查看网络

[root@MiWiFi-R3L-srv docker]# docker network ls
NETWORK ID     NAME                 DRIVER    SCOPE
2d19a8dfb493   bridge               bridge    local
c0fbaf2266c8   docker1              bridge    local
fc03b9653496   host                 host      local

docker inspect NETWORK_ID查看配置:发现其网络在192.168.1.0/24上,网关为: 192.168.1.1

[root@MiWiFi-R3L-srv docker]# docker inspect c0fbaf2266c8
[{"Name": "docker1","Id": "c0fbaf2266c86f504d02a9324c45fb49c1909f908631d6a2cd5b1bb04dc981a8","Created": "2023-11-20T18:19:18.375826061-08:00","Scope": "local","Driver": "bridge","EnableIPv6": false,"IPAM": {"Driver": "default","Options": {},"Config": [{"Subnet": "192.168.1.0/24","Gateway": "192.168.1.1"}]},"Internal": false,"Attachable": false,"Ingress": false,"ConfigFrom": {"Network": ""},"ConfigOnly": false,...}

主机2创建网络

docker network create --driver bridge --subnet 192.168.2.0/24 --gateway 192.168.2.1 docker1

docker network ls查看网络

[root@MiWiFi-R3L-srv centos7]# docker network ls
NETWORK ID     NAME      DRIVER    SCOPE
5fd741696fa2   bridge    bridge    local
04f03105e411   docker1   bridge    local
2110fa85f0da   host      host      local

docker inspect NETWORK_ID查看配置:发现其网络在192.168.2.0/24上,网关为: 192.168.2.1

[root@MiWiFi-R3L-srv docker]# docker inspect 04f03105e411
[{"Name": "docker1","Id": "c0fbaf2266c86f504d02a9324c45fb49c1909f908631d6a2cd5b1bb04dc981a8","Created": "2023-11-20T18:19:18.375826061-08:00","Scope": "local","Driver": "bridge","EnableIPv6": false,"IPAM": {"Driver": "default","Options": {},"Config": [{"Subnet": "192.168.2.0/24","Gateway": "192.168.2.1"}]},"Internal": false,"Attachable": false,"Ingress": false,"ConfigFrom": {"Network": ""},"ConfigOnly": false,...}

这样就在两台主机上创建了两个网络,一个主机的网段为1.0,一个主机的网段为2.0

下面在启动容器的时候需要把容器加入到不同的网络中

2.在两个主机上启动对应的容器

在主机1上通过镜像启动一个容器mycentos:

#通过cnetos镜像启动一个mycentos1的容器,并指定网络为docker1
[root@MiWiFi-R3L-srv docker]# docker run -it -d --name mycentos1 --net docker1 d757f6342cfa /bin/bash
644cdc0acda390cf236f247bbec6c20080ea9b7a064670fdbbaaeb33cef8995f
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
644cdc0acda3   d757f6342cfa   "/bin/bash"   20 seconds ago   Up 13 seconds             mycentos1#查看mycentos1容器网络:发现ip:192.168.1.2 在docker1网络上
[root@MiWiFi-R3L-srv docker]# docker exec -it mycentos1 ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500inet 192.168.1.2  netmask 255.255.255.0  broadcast 192.168.1.255ether 02:42:c0:a8:01:02  txqueuelen 0  (Ethernet)RX packets 19  bytes 2376 (2.3 KiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536inet 127.0.0.1  netmask 255.0.0.0loop  txqueuelen 1000  (Local Loopback)RX packets 0  bytes 0 (0.0 B)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

在主机2上通过镜像启动一个容器mycentos:

#通过cnetos镜像启动一个mycentos1的容器,并指定网络为docker1
[root@MiWiFi-R3L-srv docker]# docker run -it -d --name mycentos1 --net docker1 d757f6342cfa /bin/bash
644cdc0acda390cf236f247bbec6c20080ea9b7a064670fdbbaaeb33cef8995f
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
4ba38cf3943b d757f6342cfa   "/bin/bash"   20 seconds ago   Up 13 seconds             mycentos1#查看mycentos1容器网络:发现ip:192.168.2.2 在docker1网络上
[root@MiWiFi-R3L-srv docker]# docker exec -it mycentos1 ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500inet 192.168.2.2  netmask 255.255.255.0  broadcast 192.168.2.255ether 02:42:c0:a8:01:02  txqueuelen 0  (Ethernet)RX packets 19  bytes 2376 (2.3 KiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536inet 127.0.0.1  netmask 255.0.0.0loop  txqueuelen 1000  (Local Loopback)RX packets 0  bytes 0 (0.0 B)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  • 在主机1上ping主机2,能够ping通,他们处于同一网段
  • 在主机1的容器中ping主机1,他们也能ping通
  • 在主机1的容器中ping主机2可以ping通
  • 在主机1的容器中ping主机2的容器,ping不通,因为他们不处于同一网段
#主机1上ping主机2,ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.31.81
PING 192.168.31.81 (192.168.31.81) 56(84) bytes of data.
64 bytes from 192.168.31.81: icmp_seq=1 ttl=64 time=1.42 ms
^C
--- 192.168.31.81 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.418/1.418/1.418/0.000 ms
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
644cdc0acda3   d757f6342cfa   "/bin/bash"   12 minutes ago   Up 12 minutes             mycentos1#进入主机1容器
[root@MiWiFi-R3L-srv docker]# docker exec -it 644cdc0acda3 /bin/bash
[root@644cdc0acda3 wwwroot]# #容器中ping主机2,ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.31.140
PING 192.168.31.140 (192.168.31.140) 56(84) bytes of data.
64 bytes from 192.168.31.140: icmp_seq=1 ttl=64 time=0.359 ms
^C
--- 192.168.31.140 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.359/0.359/0.359/0.000 ms#容器中ping主机1,ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.31.81 
PING 192.168.31.81 (192.168.31.81) 56(84) bytes of data.
64 bytes from 192.168.31.81: icmp_seq=1 ttl=63 time=0.419 ms
64 bytes from 192.168.31.81: icmp_seq=2 ttl=63 time=0.387 ms
^C
--- 192.168.31.81 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1049ms
rtt min/avg/max/mdev = 0.387/0.403/0.419/0.016 ms#容器中ping主机2中的容器,ping不通
[root@644cdc0acda3 wwwroot]# ping 192.168.2.2  
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.

 那么要时主机1中的容器和主机2中的容器通信,怎么办呢,这就需要配置路由规则了

3.添加路由规则  

主机1上添加路由规则

#查看主机1上的路由规则
[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     427    0        0 docker0
172.18.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-9a2fe27fdd30
172.19.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-fe75119d5a77
192.168.1.0     0.0.0.0         255.255.255.0   U     426    0        0 br-c0fbaf2266c8
192.168.2.0     0.0.0.0         255.255.255.0   U     425    0        0 br-2d9c2d29e6d3
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
把访问 192.168.2.0 的请求转发到主机2服务器 192.168.31.81 
#在主机1上配置192.168.2.0这个路由
[root@MiWiFi-R3L-srv docker]# route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.31.81

当访问192.168.2.0这个结点的ip时,就会转发到192.168.31.81这台主机服务器上

[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     427    0        0 docker0
172.18.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-9a2fe27fdd30
172.19.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-fe75119d5a77
192.168.1.0     0.0.0.0         255.255.255.0   U     426    0        0 br-c0fbaf2266c8
192.168.2.0     192.168.31.81   255.255.255.0   UG    0      0        0 ens33
192.168.2.0     0.0.0.0         255.255.255.0   U     425    0        0 br-2d9c2d29e6d3
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0

 主机2上添加路由规则

#查看主机1上的路由规则
[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 br-04f03105e411
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
把访问 192.168.1.0 的请求转发到主机2服务器 192.168.31.140 
#在主机2上配置192.168.1.0这个路由
[root@MiWiFi-R3L-srv docker]# route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.31.140

当访问192.168.1.0这个结点的ip时,就会转发到192.168.31.140这台主机服务器上

[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0
192.168.1.0     192.168.31.140  255.255.255.0   UG    0      0        0 ens33
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 br-04f03105e411
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0

4.配置iptables规则

IPTABLES 是与最新的 3.5 版本 Linux 内核集成的 IP 信息包过滤系统 (相当于ip的防火墙),命令如下:

iptables -t 表名 <-A/I/D/R> 规则链名 [规则号] <-i/o 网卡名> -p 协议名 <-s 源IP/源子网>
--sport 源端口 <-d 目标IP/目标子网> --dport 目标端口 -j 动作
iptables -t nat -I PREROUTING -s 192.168.1.0/24 -d 192.168.2.0/24 -j DNAT --to
192.168.1.1-t nat ： 实现共享网络
-I PREROUTING：用于目标地址转换（DNAT）。
-I POSTOUTING：用于源地址转换（SNAT）
-s 源ip/子网
-d 目标ip/子网
-j DNAT DNAT：目标地址转换
主机 1 上添加如下规则: 
iptables -t nat -I PREROUTING -s 192.168.1.0/24 -d 192.168.2.0/24 -j DNAT --to 192.168.1.1
主机 2 上添加如下规则: 
iptables -t nat -I PREROUTING -s 192.168.2.0/24 -d 192.168.1.0/24 -j DNAT --to 192.168.2.1

5.容器间通信

在主机1/主机1的容器中ping主机2容器,发现可以ping通

#主机1上ping主机2的容器:可以ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=63 time=1.74 ms64 bytes from 192.168.2.2: icmp_seq=2 ttl=63 time=0.346 ms#进入主机1容器
[root@MiWiFi-R3L-srv docker]# docker exec -it 644cdc0acda3 /bin/bash#ping主机2的容器,可以ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=0.192 ms

在主机2/主机2的容器中ping主机1容器,发现可以ping通

#主机2上ping主机1的容器:可以ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=63 time=1.74 ms64 bytes from 192.168.2.2: icmp_seq=2 ttl=63 time=0.346 ms#进入主机2容器
[root@MiWiFi-R3L-srv docker]# docker exec -it 644cdc0acd1a3 /bin/bash#ping主机1的容器,可以ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=0.192 ms

这样不同主机间的容器就可以相互通信了,即可以实现负载均衡/转发等功能,一台主机部署web,一台主机部署数据库,通过docker配置就可以实现相互通信

三.三台主机通讯实验

这个和上面方法一致

1.分别在主机1、主机2、主机3上面创建两个网络

  • 主机1的IP地址为：192.168.31.140
  • 主机2的IP地址为：192.168.31.81
  • 主机2的IP地址为：192.168.31.117

主机1创建网络

docker network create --driver bridge --subnet 192.168.1.0/24 --gateway
192.168.1.1 docker1

docker network ls查看网络

[root@MiWiFi-R3L-srv docker]# docker network ls
NETWORK ID     NAME                 DRIVER    SCOPE
2d19a8dfb493   bridge               bridge    local
c0fbaf2266c8   docker1              bridge    local
fc03b9653496   host                 host      local

docker inspect NETWORK_ID查看配置:发现其网络在192.168.1.0/24上,网关为: 192.168.1.1

[root@MiWiFi-R3L-srv docker]# docker inspect c0fbaf2266c8
[{"Name": "docker1","Id": "c0fbaf2266c86f504d02a9324c45fb49c1909f908631d6a2cd5b1bb04dc981a8","Created": "2023-11-20T18:19:18.375826061-08:00","Scope": "local","Driver": "bridge","EnableIPv6": false,"IPAM": {"Driver": "default","Options": {},"Config": [{"Subnet": "192.168.1.0/24","Gateway": "192.168.1.1"}]},"Internal": false,"Attachable": false,"Ingress": false,"ConfigFrom": {"Network": ""},"ConfigOnly": false,...}

主机2创建网络

docker network create --driver bridge --subnet 192.168.2.0/24 --gateway 192.168.2.1 docker1

docker network ls查看网络

[root@MiWiFi-R3L-srv centos7]# docker network ls
NETWORK ID     NAME      DRIVER    SCOPE
5fd741696fa2   bridge    bridge    local
04f03105e411   docker1   bridge    local
2110fa85f0da   host      host      local

docker inspect NETWORK_ID查看配置:发现其网络在192.168.2.0/24上,网关为: 192.168.2.1

[root@MiWiFi-R3L-srv docker]# docker inspect 04f03105e411
[{"Name": "docker1","Id": "c0fbaf2266c86f504d02a9324c45fb49c1909f908631d6a2cd5b1bb04dc981a8","Created": "2023-11-20T18:19:18.375826061-08:00","Scope": "local","Driver": "bridge","EnableIPv6": false,"IPAM": {"Driver": "default","Options": {},"Config": [{"Subnet": "192.168.2.0/24","Gateway": "192.168.2.1"}]},"Internal": false,"Attachable": false,"Ingress": false,"ConfigFrom": {"Network": ""},"ConfigOnly": false,...}

 主机3创建网络

docker network create --driver bridge --subnet 192.168.3.0/24 --gateway 192.168.3.1 docker1

docker network ls查看网络

[root@MiWiFi-R3L-srv centos7]# docker network ls
NETWORK ID     NAME      DRIVER    SCOPE
5fd741696fa2   bridge    bridge    local
04f03105e413  docker1   bridge    local
2110fa85f0da   host      host      local

docker inspect NETWORK_ID查看配置:发现其网络在192.168.3.0/24上,网关为: 192.168.3.1

[root@MiWiFi-R3L-srv docker]# docker inspect 04f03105e413
[{"Name": "docker1","Id": "c0fbaf2266c86f504d02a9324c45fb49c1909f908631d6a2cd5b1bb04dc981a8","Created": "2023-11-20T18:19:18.375826061-08:00","Scope": "local","Driver": "bridge","EnableIPv6": false,"IPAM": {"Driver": "default","Options": {},"Config": [{"Subnet": "192.168.3.0/24","Gateway": "192.168.3.1"}]},"Internal": false,"Attachable": false,"Ingress": false,"ConfigFrom": {"Network": ""},"ConfigOnly": false,...}

这样就在三台主机上创建了三个网络,一个主机的网段为1.0,一个主机的网段为2.0,,一个主机的网段为3.0,下面在启动容器的时候需要把容器加入到不同的网络中

2.在三台主机上启动对应的容器

在主机1上通过镜像启动一个容器mycentos:

#通过cnetos镜像启动一个mycentos1的容器,并指定网络为docker1
[root@MiWiFi-R3L-srv docker]# docker run -it -d --name mycentos1 --net docker1 d757f6342cfa /bin/bash
644cdc0acda390cf236f247bbec6c20080ea9b7a064670fdbbaaeb33cef8995f
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
644cdc0acda3   d757f6342cfa   "/bin/bash"   20 seconds ago   Up 13 seconds             mycentos1#查看mycentos1容器网络:发现ip:192.168.1.2 在docker1网络上
[root@MiWiFi-R3L-srv docker]# docker exec -it mycentos1 ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500inet 192.168.1.2  netmask 255.255.255.0  broadcast 192.168.1.255ether 02:42:c0:a8:01:02  txqueuelen 0  (Ethernet)RX packets 19  bytes 2376 (2.3 KiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536inet 127.0.0.1  netmask 255.0.0.0loop  txqueuelen 1000  (Local Loopback)RX packets 0  bytes 0 (0.0 B)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

在主机2上通过镜像启动一个容器mycentos:

#通过cnetos镜像启动一个mycentos1的容器,并指定网络为docker1
[root@MiWiFi-R3L-srv docker]# docker run -it -d --name mycentos1 --net docker1 d757f6342cfa /bin/bash
644cdc0acda390cf236f247bbec6c20080ea9b7a064670fdbbaaeb33cef8995f
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
4ba38cf3943b d757f6342cfa   "/bin/bash"   20 seconds ago   Up 13 seconds             mycentos1#查看mycentos1容器网络:发现ip:192.168.2.2 在docker1网络上
[root@MiWiFi-R3L-srv docker]# docker exec -it mycentos1 ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500inet 192.168.2.2  netmask 255.255.255.0  broadcast 192.168.2.255ether 02:42:c0:a8:01:02  txqueuelen 0  (Ethernet)RX packets 19  bytes 2376 (2.3 KiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536inet 127.0.0.1  netmask 255.0.0.0loop  txqueuelen 1000  (Local Loopback)RX packets 0  bytes 0 (0.0 B)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

在主机3上通过镜像启动一个容器mycentos:

#通过cnetos镜像启动一个mycentos1的容器,并指定网络为docker1
[root@MiWiFi-R3L-srv docker]# docker run -it -d --name mycentos1 --net docker1 d757f6342cfa /bin/bash
644cdc0acda390cf236f247bbec6c20080ea9b7a064670fdbbaaeb33cef8995f
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
4ba38cf3943b3 d757f6342cfa   "/bin/bash"   20 seconds ago   Up 13 seconds             mycentos1#查看mycentos1容器网络:发现ip:192.168.3.2 在docker1网络上
[root@MiWiFi-R3L-srv docker]# docker exec -it mycentos1 ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500inet 192.168.3.2  netmask 255.255.255.0  broadcast 192.168.3.255ether 02:42:c0:a8:01:02  txqueuelen 0  (Ethernet)RX packets 19  bytes 2376 (2.3 KiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536inet 127.0.0.1  netmask 255.0.0.0loop  txqueuelen 1000  (Local Loopback)RX packets 0  bytes 0 (0.0 B)RX errors 0  dropped 0  overruns 0  frame 0TX packets 0  bytes 0 (0.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  • 在主机1上ping主机2,能够ping通,他们处于同一网段
  • 在主机1的容器中ping主机1,他们也能ping通
  • 在主机1的容器中ping主机2可以ping通
  • 在主机1的容器中ping主机2的容器,在主机1的容器中ping主机3的容器,ping不通,因为他们不处于同一网段
#主机1上ping主机2,ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.31.81
PING 192.168.31.81 (192.168.31.81) 56(84) bytes of data.
64 bytes from 192.168.31.81: icmp_seq=1 ttl=64 time=1.42 ms
^C
--- 192.168.31.81 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.418/1.418/1.418/0.000 ms
[root@MiWiFi-R3L-srv docker]# docker ps
CONTAINER ID   IMAGE          COMMAND       CREATED          STATUS          PORTS     NAMES
644cdc0acda3   d757f6342cfa   "/bin/bash"   12 minutes ago   Up 12 minutes             mycentos1#进入主机1容器
[root@MiWiFi-R3L-srv docker]# docker exec -it 644cdc0acda3 /bin/bash
[root@644cdc0acda3 wwwroot]# #容器中ping主机2,ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.31.140
PING 192.168.31.140 (192.168.31.140) 56(84) bytes of data.
64 bytes from 192.168.31.140: icmp_seq=1 ttl=64 time=0.359 ms
^C
--- 192.168.31.140 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.359/0.359/0.359/0.000 ms#容器中ping主机1,ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.31.81 
PING 192.168.31.81 (192.168.31.81) 56(84) bytes of data.
64 bytes from 192.168.31.81: icmp_seq=1 ttl=63 time=0.419 ms
64 bytes from 192.168.31.81: icmp_seq=2 ttl=63 time=0.387 ms
^C
--- 192.168.31.81 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1049ms
rtt min/avg/max/mdev = 0.387/0.403/0.419/0.016 ms#容器中ping主机2中的容器,ping不通
[root@644cdc0acda3 wwwroot]# ping 192.168.2.2  
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.#容器中ping主机3中的容器,ping不通
[root@644cdc0acda3 wwwroot]# ping 192.168.3.2  
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.

 那么要时主机1中的容器和主机2中的容器/主机2中的容器        通信,怎么办呢,这就需要配置路由规则了

3.添加路由规则  

主机1上添加路由规则

#查看主机1上的路由规则
[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     427    0        0 docker0
172.18.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-9a2fe27fdd30
172.19.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-fe75119d5a77
192.168.1.0     0.0.0.0         255.255.255.0   U     426    0        0 br-c0fbaf2266c8
192.168.2.0     0.0.0.0         255.255.255.0   U     425    0        0 br-2d9c2d29e6d3
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
把访问 192.168.2.0 的请求转发到主机2服务器 192.168.31.81
把访问 192.168.2.0 的请求转发到主机3服务器 192.168.31.117 
#在主机1上配置192.168.2.0这个路由
[root@MiWiFi-R3L-srv docker]# route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.31.81
#在主机1上配置192.168.3.0这个路由
[root@MiWiFi-R3L-srv docker]# route add -net 192.168.3.0 netmask 255.255.255.0 gw 192.168.31.117

当访问192.168.2.0这个结点的ip时,就会转发到192.168.31.81这台主机服务器上

当访问192.168.3.0这个结点的ip时,就会转发到192.168.31.117这台主机服务器上

[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     427    0        0 docker0
172.18.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-9a2fe27fdd30
172.19.0.0      0.0.0.0         255.255.0.0     U     0      0        0 br-fe75119d5a77
192.168.1.0     0.0.0.0         255.255.255.0   U     426    0        0 br-c0fbaf2266c8
192.168.2.0     192.168.31.81   255.255.255.0   UG    0      0        0 ens33
192.168.3.0     192.168.31.117   255.255.255.0   UG    0      0        0 ens33
192.168.2.0     0.0.0.0         255.255.255.0   U     425    0        0 br-2d9c2d29e6d3
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0

 主机2上添加路由规则

#查看主机1上的路由规则
[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 br-04f03105e411
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
把访问 192.168.1.0 的请求转发到主机2服务器 192.168.31.140
把访问 192.168.3.0 的请求转发到主机2服务器 192.168.31.117 
#在主机2上配置192.168.1.0这个路由
[root@MiWiFi-R3L-srv docker]# route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.31.140#在主机2上配置192.168.3.0这个路由
[root@MiWiFi-R3L-srv docker]# route add -net 192.168.3.0 netmask 255.255.255.0 gw 192.168.31.117

当访问192.168.1.0这个结点的ip时,就会转发到192.168.31.140这台主机服务器上

当访问192.168.3.0这个结点的ip时,就会转发到192.168.31.117这台主机服务器上

[root@MiWiFi-R3L-srv docker]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         XiaoQiang       0.0.0.0         UG    100    0        0 ens33
172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0
192.168.1.0     192.168.31.140  255.255.255.0   UG    0      0        0 ens33
192.168.3.0     192.168.31.117  255.255.255.0   UG    0      0        0 ens33
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 br-04f03105e411
192.168.31.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0

4.配置iptables规则

IPTABLES 是与最新的 3.5 版本 Linux 内核集成的 IP 信息包过滤系统 (相当于ip的防火墙),命令如下:

iptables -t 表名 <-A/I/D/R> 规则链名 [规则号] <-i/o 网卡名> -p 协议名 <-s 源IP/源子网>
--sport 源端口 <-d 目标IP/目标子网> --dport 目标端口 -j 动作
iptables -t nat -I PREROUTING -s 192.168.1.0/24 -d 192.168.2.0/24 -j DNAT --to
192.168.1.1-t nat ： 实现共享网络
-I PREROUTING：用于目标地址转换（DNAT）。
-I POSTOUTING：用于源地址转换（SNAT）
-s 源ip/子网
-d 目标ip/子网
-j DNAT DNAT：目标地址转换
主机 1 上添加如下规则: 
iptables -t nat -I PREROUTING -s 192.168.1.0/24 -d 192.168.2.0/24 -j DNAT --to 192.168.1.1iptables -t nat -I PREROUTING -s 192.168.1.0/24 -d 192.168.3.0/24 -j DNAT --to 192.168.1.1
主机 2 上添加如下规则: 
iptables -t nat -I PREROUTING -s 192.168.2.0/24 -d 192.168.1.0/24 -j DNAT --to 192.168.2.1iptables -t nat -I PREROUTING -s 192.168.2.0/24 -d 192.168.3.0/24 -j DNAT --to 192.168.2.1
 主机3 上添加如下规则: 
iptables -t nat -I PREROUTING -s 192.168.3.0/24 -d 192.168.1.0/24 -j DNAT --to 192.168.2.1iptables -t nat -I PREROUTING -s 192.168.3.0/24 -d 192.168.2.0/24 -j DNAT --to 192.168.2.1

5.容器间通信

在主机1/主机1的容器中ping主机2容器/主机3容器,发现可以ping通

#主机1上ping主机2的容器:可以ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=63 time=1.74 ms64 bytes from 192.168.2.2: icmp_seq=2 ttl=63 time=0.346 ms#主机1上ping主机3的容器:可以ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.3.2
PING 192.168.3.2 (192.168.3.2) 56(84) bytes of data.
64 bytes from 192.168.3.2: icmp_seq=1 ttl=63 time=1.74 ms64 bytes from 192.168.3.2: icmp_seq=2 ttl=63 time=0.346 ms#进入主机1容器
[root@MiWiFi-R3L-srv docker]# docker exec -it 644cdc0acda3 /bin/bash#ping主机2的容器,可以ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=0.192 ms#ping主机3的容器,可以ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.3.2
PING 192.168.3.2 (192.168.3.2) 56(84) bytes of data.
64 bytes from 192.168.3.2: icmp_seq=1 ttl=64 time=0.192 ms

在主机2/主机2的容器中ping主机1容器/主机3容器,发现可以ping通

#主机2上ping主机1的容器:可以ping通
[root@MiWiFi-R3L-srv docker]# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=63 time=1.74 ms64 bytes from 192.168.2.2: icmp_seq=2 ttl=63 time=0.346 ms#进入主机2容器
[root@MiWiFi-R3L-srv docker]# docker exec -it 644cdc0acd1a3 /bin/bash#ping主机1的容器,可以ping通
[root@644cdc0acda3 wwwroot]# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=0.192 ms

[上一节][Docker]七.配置 Docker 网络

[下一节][Docker]九.Docker compose讲解 

http://www.yayakq.cn/news/634560/

相关文章：

  • 做包装盒子的厂家哪个网站自己做的网站怎么放上网
  • 站长之家查询的网址广东网站备案多长时间
  • 关于一学一做的短视频网站网站建设准备
  • 网站地图做计划任务盐城网站开发市场
  • 三位数的域名网站好的网站或网页
  • 精品课程网站的设计与建设要求东莞网站建设牛魔网a
  • 新邱建设网站坪山手机网站建设
  • 网站效果图用什么做区块链开发技术
  • wordpress 最弱网站怎么优化seo
  • 海淀区做网站厂家网站建设炎陵
  • 建设自己网站的流程陕西商城网站建设
  • 网站如何链接备案系统广东省建设厅三库一平台
  • 库尔勒西部建设网站网页制作与设计答案
  • 广告网站建设制作设计商丘网站开发公司
  • site 危险网站网站设计不同的原因
  • 有没有免费的源码网站wordpress 广告插件下载
  • 简单网站建设合同汕头高端模板建站
  • 我市强化属地网站建设app制作成本
  • 生成静态页面网站源码制作移动端网页
  • 知名网站用的技术模板网页生成
  • wordpress建站很麻烦做巧克力的网站
  • 在手机上建网站seo快速排名软件方案
  • 建网站行业东莞企业推广网站制作
  • 建设企业网站需要使用哪些技术企业网站建设定制开发服务
  • 哪里有做效果图的网站wordpress视觉差
  • 信用卡网站模板批量导文章到wordpress
  • 互联网科技网站网站可信图标
  • 企业网站建设哪里好wordpress收费资源下载
  • 招聘销售员网站建设网络推广摄影师的网站有哪些
  • 上饶婚纱工作室网站建设模板网站优