cdn如何做网站统计关于电子工程的学术论坛
1. 共享文件夹无法加载；通过网上把文件夹加载后，拷贝文件很慢，任务管理器查看发现硬盘读写速率很低。解决办法：重新安装vmware tools。
2. 拷贝Linux源码到虚拟机，解压。
3. 虚拟机基本库安装
forlinx@ubuntu:~$ sudo apt-get update //更新下载源信息
forlinx@ubuntu:~$ sudo apt-get install build-essential //提供编译程序必须软件包的列表信息
forlinx@ubuntu:~$ sudo apt-get install libncurses* //用于生成基于文本的用户界面
forlinx@ubuntu:~$ sudo apt-get install lzop //基于Lzo库的压缩解压工具
forlinx@ubuntu:~$ sudo apt-get install net-tools //网络配置工具
以上顺利完成
4. 编译OK3568 Linux源码必要库安装
forlinx@ubuntu:~$ sudo apt-get update //更新apt-get下载源
forlinx@ubuntu:~$ sudo apt-get install openssh-server vim git fakeroot //必备工具包的安装
forlinx@ubuntu:~$ sudo apt-get install repo git ssh make gcc libssl-dev liblz4-tool expect g++ patchelf chrpath gawk texinfo chrpath diffstat binfmt-support qemu-user-static live-build bison flex fakeroot cmake gcc-multilib g++-multilib unzip device-tree-compiler python-pip libncurses5-dev
以上顺利完成
5. Qt Creator安装
不安装了，先试下
6. 编译
./build.sh
漫长的等待，不知道等了多少个小时，搞了大半天，卡在QT那里不动，于是回头重装QT。然后：
./build.sh cleanall
./build.sh
2023-10-04T00:51:04 >>> host-lzip 1.19 Extracting
2023-10-04T00:51:05 >>> host-lzip 1.19 Patching
2023-10-04T00:51:05 >>> host-lzip 1.19 Configuring
2023-10-04T00:51:05 >>> host-lzip 1.19 Building
2023-10-04T00:51:09 >>> host-lzip 1.19 Installing to host directory
2023-10-04T00:51:10 >>> host-m4 1.4.18 Extracting
2023-10-04T00:51:10 >>> host-m4 1.4.18 Patching
2023-10-04T00:51:11 >>> host-m4 1.4.18 Updating config.sub and config.guess
2023-10-04T00:51:11 >>> host-m4 1.4.18 Patching libtool
2023-10-04T00:51:11 >>> host-m4 1.4.18 Configuring
2023-10-04T00:51:43 >>> host-m4 1.4.18 Building
2023-10-04T00:51:46 >>> host-m4 1.4.18 Installing to host directory
2023-10-04T00:51:47 >>> host-bison 3.0.4 Extracting
2023-10-04T00:51:48 >>> host-bison 3.0.4 Patching
2023-10-04T00:51:48 >>> host-bison 3.0.4 Updating config.sub and config.guess
2023-10-04T00:51:48 >>> host-bison 3.0.4 Patching libtool
2023-10-04T00:51:48 >>> host-bison 3.0.4 Configuring
00:51分开始编译，看看要什么时候可以结束
14点多完成编译，共花了13个多小时，提示build.sh指令错误，所在行1077，打开文件，最后一行1066。
因为自己调整了build.sh设备树，为了确认是不是自己的问题，重新解压，重新编译。
Writing boot file...
Writing firmware...
Generating MD5 data...
MD5 data generated successfully!
New image generated successfully!
Making ./Image/update.img OK.
Running build_updateimg succeeded.
Running build_save succeeded.
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
grep: exceeded PCRE's backtracking limit
PLEASE CHECK BOARD GPIO POWER DOMAIN CONFIGURATION !!!!!
<<< ESPECIALLY Wi-Fi/Flash/Ethernet IO power domain >>> !!!!!
Check Node [pmu_io_domains] in the file: /home/forlinx/3568/OK3568-linux-source/kernel/arch/arm64/boot/dts/rockchip/OK3568-C-linux.dts
请再次确认板级的电源域配置！！！！！！
<<< 特别是Wi-Fi，FLASH，以太网这几路IO电源的配置 >>> ！！！！！
检查内核文件 /home/forlinx/3568/OK3568-linux-source/kernel/arch/arm64/boot/dts/rockchip/OK3568-C-linux.dts 的节点 [pmu_io_domains]
Running build_allsave succeeded.
编译成功
7. 修改设备树，禁用PCIE
&pcie30phy {
status = "disabled";
};
&pcie3x2 {
reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_sys>;
status = "disabled";
};
&pcie2x1 {
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_sys>;
status = "disabled";
};
保存，编译
成功
8. 烧录