公司网站设计广州什么是网络营销?常见的网络营销方式有哪些?

操作步骤

1. 配置AC和定位服务器通信

   # 配置Router，创建VLAN102，加入接口GE1/0/0，配置VLANIF102接口和AC互通。
   <Router> system-view
   [Router] vlan 102
   [Router-vlan102] quit
   [Router] interface gigabitethernet 1/0/0
   [Router-GigabitEthernet1/0/0] port trunk allow-pass vlan 102
   [Router-GigabitEthernet1/0/0] quit
   [Router] interface vlanif 102
   [Router-Vlanif102] ip address 10.23.102.1 24
   # 配置AC，创建VLAN102，加入接口GE0/0/2，配置VLANIF102接口和Router互通。
   <AC> system-view
   [AC] vlan 102
   [AC-vlan102] quit
   [AC] interface gigabitethernet 0/0/2
   [AC-GigabitEthernet0/0/2] port trunk allow-pass vlan 102
   [AC-GigabitEthernet0/0/2] quit
   [AC] interface vlanif 102
   [AC-Vlanif102] ip address 10.23.102.2 24
   [AC-Vlanif102] quit
   # 在AC上创建一条到定位服务器的静态路由，下一跳指向Router。
   [AC] ip route-static 10.23.103.1 32 10.23.102.1
   # 在AC上执行ping操作，目的地址是定位服务器，可以ping通表示网络正常互通。
   [AC] ping 10.23.103.1PING 10.23.102.2: 56  data bytes, press CTRL_C to breakReply from 10.23.103.1: bytes=56 Sequence=1 ttl=255 time=1 ms
2. 配置AC设备与定位服务器通信

   # 配置AC的SNMP协议版本。[AC] snmp-agent sys-info version v2c
   # 配置读团体名为public123，写团体名为private123。[AC] snmp-agent community read public123
   [AC] snmp-agent community write private123

3. 在AC上查看WLAN网络的基本配置

   检查项	命令	数据
   查看AP所属的AP组	display ap all	AP组：ap-group1 AP name：AP1，AP2，AP3，...

   • 如果AP组和单个AP下都有配置，则单个AP下的配置优先生效。
   • 对于新创建的模板，用户配置完成后，需要将此模板引用到AP或者AP组，才能最终生效。
4. 配置蓝牙终端定位功能

   # 创建名为“wlan-ble”的BLE模板，开启蓝牙监控功能，可以接收周边的蓝牙基站信息，配置蓝牙Tag定位信息上报的目的地和端口号。
   [AC] wlan
   [AC-wlan-view] ble-profile name wlan-ble
   [AC-wlan-ble-prof-wlan-ble] sniffer enable ibeacon-mode
   [AC-wlan-ble-prof-wlan-ble] report enable
   [AC-wlan-ble-prof-wlan-ble] report-to-server ip-address 10.23.102.1 port 10001 via-ac ac-port 32180
   [AC-wlan-ble-prof-wlan-ble] quit
   # 将AP覆盖范围内的BLE基站添加到监控列表中。
   [AC-wlan-view] ble monitoring-list mac 1234-1234-1000 to 1234-1234-1002
   # 配置AP组引用BLE模板。
   [AC-wlan-view] ap-group name ap-group1
   [AC-wlan-ap-group-ap-group1] ble-profile wlan-ble
   [AC-wlan-ap-group-ap-group1] quit

5. 配置定位服务器

6. 验证配置结果

   # AP获取到BLE基站信息后，通过执行命令display wlan ble site-info { all | mac-address mac-address }，可以查看AP获取到的BLE基站信息。

   <span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0176912533__b987943675190923">display wlan ble site-info all</strong>
   ------------------------------------------------------------------------------------------------------------------------------------
   ---------------
   Index  MAC             Host AP ID Host AP name RSSI  Power Type       DetachedFlag Aging-Timeout(m)  Broadcast count Advertisement d
   ata
   ------------------------------------------------------------------------------------------------------------------------------------
   ---------------
   0      0000-0101-0202  0          area_1       -30   50%    ibeacon   N            57                10        02-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-fa
   1      0000-0101-0303  0          area_1       -31   51%    ibeacon   N            57                12        01-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-fa
   2      0000-0101-0505  0          area_1       -33   55%    ibeacon   N            57                22        03-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-fa
   ------------------------------------------------------------------------------------------------------------------------------------
   ---------------
   Total: 3</span></span></span>

   # 用户的蓝牙终端接入WLAN网络并开启蓝牙功能后，安装第三方的APP，APP上可以显示自己在地图上的位置，同时收到附近的导购信息。

配置文件

• Router的配置文件
  #
  vlan batch 101 to 102
  #
  interface Vlanif102ip address 10.23.102.1 255.255.255.0
  #
  interface GigabitEthernet1/0/0port link-type trunkport trunk allow-pass vlan 101 to 102
  #
  return
  AC的配置文件#
  vlan batch 100 to 102
  #
  interface Vlanif102ip address 10.23.102.2 255.255.255.0
  #
  interface GigabitEthernet0/0/2port link-type trunkport trunk allow-pass vlan 101 to 102
  #
  ip route-static 10.23.103.1 255.255.255.255 10.23.102.1
  #snmp-agent local-engineid 800007DB030200000000E0snmp-agent community read %^%#sP6,%Hno.$v[Lf#fiyP(eKm4)vNP*Q"mA~'$XjP4r}XXU4f%'&y>D`/1.5\Clr]I5mUJ46!a7'9p#*o2%^%#snmp-agent community write %^%#/.U;L9&iwS.dF15y]J"N\XU='K:YkWj/O.)=6W$3q{M1J4.<X"\h{a:p)c\;TBL\=qn=u+7YR~L/#`V>%^%#snmp-agent sys-info version v2csnmp-agent
  #
  wlanble-profile name wlan-blesniffer enable ibeacon-modereport-to-server ip-address 10.23.102.1 port 10001 via-ac ac-port 32180report enableble monitoring-list mac 1234-1234-1000ble monitoring-list mac 1234-1234-1001ble monitoring-list mac 1234-1234-1002ap-group name ap-group1ble-profile wlan-ble
  #
  return