网站建设的硬件支持情感视频素材网站

说在前面

• esp32版本：s3
• 运行环境：esp-idf(std)
• 开发环境：wsl2
• LCD模块：ST7789V2 240*280 LCD
• github地址：这里

模块详情

• 某宙的esp32s3开发板
  

• 某雪的1.69inch LCD模块，包含杜邦线
  

准备工作

• 开发环境（std）搭建，见上篇

• lcd引脚
  

• esp32引脚
  

• 引脚连接
  除了几个固定的，其它可以自行选择，这里我的连接如下

  LCD	esp32(括号里为上图的序号)	esp32 gpio
  VCC	3.3V(18)	/
  GND	GND(17)	/
  DIN	SPI_MOSI(20)	GPIO17
  CLK	SPI_CK(19)	GPIO18
  CS	SPI_CS(23)	GPIO14
  DC	GPIO15(22)	GPIO15
  RST	GPIO16(21)	GPIO16
  BL	GPIO13(24)	GPIO13

开始

• 如果从空工程开始的话，可以使用code-generate

  cargo generate esp-rs/esp-idf-template cargo
  

• 添加依赖

  [features]
  default = ["std", "embassy", "esp-idf-svc/native"]pio = ["esp-idf-svc/pio"]
  std = ["alloc", "esp-idf-svc/binstart", "esp-idf-svc/std"]
  alloc = ["esp-idf-svc/alloc"]
  nightly = ["esp-idf-svc/nightly"]
  experimental = ["esp-idf-svc/experimental"]
  embassy = ["esp-idf-svc/embassy-sync", "esp-idf-svc/critical-section", "esp-idf-svc/embassy-time-driver"][dependencies]
  anyhow = {version = "1", features = ["backtrace"]}
  log = { version = "0.4", default-features = false }
  esp-idf-svc = { version = "0.47.1", default-features = false }
  embedded-graphics = "0.8.1"
  display-interface-spi = "0.4"
  mipidsi = "0.7.1"[build-dependencies]
  embuild = "0.31.3"[package.metadata.esp-idf-sys]
  esp_idf_tools_install_dir = "global"
  

• 代码(逻辑基本和树莓派一致)

  use display_interface_spi::SPIInterfaceNoCS;
  use embedded_graphics::{mono_font::{MonoTextStyle, ascii::FONT_10X20}, pixelcolor::Rgb565, text::Text, prelude::*, Drawable};
  use esp_idf_svc::hal::{spi, gpio, prelude::*};
  use anyhow::Result;fn main() -> Result<()> {// It is necessary to call this function once. Otherwise some patches to the runtime// implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71esp_idf_svc::sys::link_patches();// Bind the log crate to the ESP Logging facilitiesesp_idf_svc::log::EspLogger::initialize_default();let peripherals = Peripherals::take().unwrap();let pins = peripherals.pins;test_lcd(peripherals.spi2,pins.gpio13.into(),pins.gpio15.into(),pins.gpio16.into(),pins.gpio18.into(),pins.gpio17.into(),pins.gpio14.into(),)?;Ok(())
  }fn test_lcd(spi: spi::SPI2,backlight: gpio::AnyOutputPin,dc: gpio::AnyOutputPin,rst: gpio::AnyOutputPin,sclk: gpio::AnyOutputPin,sdo: gpio::AnyOutputPin,cs: gpio::AnyOutputPin,
  ) -> Result<()> {let driver = spi::SpiDeviceDriver::new_single(spi,sclk,sdo,Option::<gpio::AnyIOPin>::None,Some(cs),&spi::SpiDriverConfig::new().dma(spi::Dma::Disabled),&spi::SpiConfig::new().baudrate(20_000_000.into()).data_mode(esp_idf_svc::hal::spi::config::MODE_0),)?;let dc = gpio::PinDriver::output(dc)?;let rst = gpio::PinDriver::output(rst)?;let mut backlight = gpio::PinDriver::output(backlight)?;let di = SPIInterfaceNoCS::new(driver, dc);let mut delay = esp_idf_svc::hal::delay::Ets;let mut display = mipidsi::Builder::st7789(di).with_display_size(240, 280).with_orientation(mipidsi::Orientation::Landscape(true)).init(&mut delay, Some(rst)).unwrap();// Textlet text = "Hello World ^_^;";let text_x = 120;let text_y = 280 / 2;let text_style = MonoTextStyle::new(&FONT_10X20, Rgb565::WHITE);// Alternating colorlet colors = [Rgb565::RED, Rgb565::GREEN, Rgb565::BLUE];// Clear the display initiallydisplay.clear(colors[0]).unwrap();// Turn on backlightlet _ = backlight.set_high();// Draw textText::new(text, Point::new(text_x, text_y), text_style).draw(&mut display).unwrap();println!("Draw Hello from Rust!");Ok(())
  }
  

编译

• 编译如果不通过，可以参考环境搭建

  cargo build --target xtensa-esp32s3-espidf
  

烧录

• wsl访问usb设备见环境搭建

  espflash flash target/xtensa-esp32s3-espidf/debug/rs-esp32s3-st7789-demo
  

结果